Cleaning, waxing, and detailing a car is no definitive procedure. Yet, for some people who enjoy cars, it seems more complex than just figuring out that perfect grip. One important step in car detailing is polishing your car. It is the one task where you don’t want to spoil it as the cost of clear coatings is very high. But why worry when you have the perfect solution? Hytec Auto Body Shop is an ideal solution for your wrecked car, which is known for its comprehensive car detailing services.
What is Car Detailing?
Car detailing is a process of detailed car cleaning with additional repair of the harmed components. Externally, detailing protects paint, glass, and body parts against dangerous UV rays, dirt, and other harm that may be inflicted on parts by frequent driving.
Why You Need To Polish Your Car?
Car owners are generally aware of paint correction as a process to beautify their car and have it look brand new. When the clear coat of your car paint is compromised, the dust falling on the car surface seeps into the paint further and can cause other problems like sun damage, chipping, and color fading.
To ensure that the paint of the car looks glowing, new, and clean, most car owners take their car to the auto body or detailing shops to get a professional paint correction. The paint correction process involves filling in any gaps that may be present in the car’s clear coat after which paint protection is applied; which could be in the form of a paint seal or a ceramic coating.
Car Polishing Process
Remember that the steps discussed below are best practices for a perfect polish but it is advised you to contact the best car detailing specialist, Hytec Auto Garage, before attempting it on your own.
Attempting advanced car detailing and polishing on your car leads to damage and loss of a lot of money.
Preparation
- Wash your car: This is where you’ll remove all standing dirt, debris, and contaminants on the vehicle paintwork surface. Other early layers of car wax and paint sealants will also be removed.
- Decontamination Spray: It is usually preferable for most detailers to go with a clay bar or clay towel to wipe the embedded debris in the clear coat. Though this is relatively efficient, this is a place where mistakes or destruction can be made. The critical factor of contacting the surface with a moist clay bar is lubrication. If you do not do this – you may be able to peel off small portions of the clear coat.
Second, to prevent damage from occurring, apply a decontamination spray – an iron or fallout remover. This will “melt” iron which may include brake dust particles that may stick to the clear coat.
Leveling
Another process known as leveling can be split into three: leveling surface scratches, then polishing, and final protection. For this step, you need an electric polish (commonly known as a sanding wheel), a cutting compound, and some microfiber cutting pads. You can also use a dual-action polisher to get a perfect finish. Three ways are:
- The best working tool to be used when applying cutting compound is the microfiber cutting pad together with an electric polisher.
- The cutting pad needs to be replaced about once every six square feet of usage.
- Continue appropriate correction for the whole vehicle.
Polishing
Polishing includes the following steps:
- It is effective to start with a new, unused polishing pad and disk to avoid the transfer of more residues during polishing.
- Spread the polish following the body lines of your car.
- You should also change pads as often as it takes whenever you apply a new coat of polish on your nails. For leveled clear coats, 2-3 polish coatings should suffice or sufficiently meet the levels required.
Protecting
As you have been very cautious and following the above-written steps, you should no longer observe paint swirls on your car’s surface. You can apply a wax or a sealer; however, there are much better products available today that shield and add the aspect of sheen.
It is necessary to paint the coating in order not to repeat the process quite soon. The best way to protect the paint of your car is to get a nano-ceramic coating.
Conclusion
Polishing improves the car’s look and shields the paint that’s why it is a crucial stage in the car detailing process. You may prevent serious damage and maintain the value of your vehicle by adhering to the aforementioned practices. While doing it by yourself contact professionals at Hytec Auto Garage for car detailing services to restore the beauty of your car.
